Hops moisture meter, G-34

Moisture meter

Name: Hops moisture meter, G-34
Material: Hops, baled hops
Mc: 7-14% on hops
Calibrations: Hops
Overview The G-34 moisture tester lets you easily check moisture levels in baled hops to assure high-quality harvest and safe storage. The large analog display and built-in battery check make this a favorite among hop growers worldwide.
Your Benefits: Easy-to-read analog display Moisture Range: 7%-14% on hops Built-in battery and calibration check Auto-shutoff timer saves battery life Size: 19x10x7cm (7 3/8x3 7/8x2 3/4”) Weight: 450gr. (1 lb) Rugged construction ensures years of reliable use Sturdy plastic carrying case 9V battery 1-year warranty

Electrodes

	831 Short needle electrode (Requires H-4 Handle) Benefits Multi-pin probe, for testing MC of hay in the windrow and other loose material
	830-5 Pen electrode specially for hops. Benefits For testing standard and high density hop bales. (Requires H-4 Handle)
	H-4 Handle for electrodes 830-x, 831 and 832 Benefits Useful for large or high density bales. Two handed operation is recommended over using an electrode that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.
	30-E/C Electrode with 2 long insulated pins of 24cm (9½") Benefits The long insulated pins are ideal for measuring the moisture content in bales. Thanks to the insulated pins with triangular tips, you measure fairly easy inside a tight bale instead of measuring the surface moisture

Accessoires

MCS-44
This moisture content standard is great for verifying that your hops moisture meter is in calibration.

With two electrical resistance values (8% and 10%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy.

The MCS-44 is also available with a letter of certification traceable to NIST.

Downloads & Videos

Manual:
Brochure:

Information request

Top