FX-20, moisture meter for reed, digital

Moisture meter

Name: FX-20, moisture meter for reed, digital
Material: Reed using the Hay scale
Mc: 6%-40%
Calibrations: Reed using the hay scale
Overview Large, custom display with auto backlight – easy to read under all conditions Modern case design with large, tactile buttons and E-Z grip handle On-screen statistics for up to 100 readings saved to the meter High, Low, Average, Standard Deviation Moisture Range: Reed/Hay 6%-40% Alarm set point - alerts to user-selected MC level Internal calibration check “Low Batt” warning with audio Auto off timer. Set to 1m, 4m or 10m Compatible with existing Delmhorst prods and electrodes
Your Benefits: Specifications Power: 2x AA Alkaline batteries Temperature Correction Range: 0°-255°F (-18°-124°C) QR code on meter for easy access to support materials and meter registration Size: meter only - 8.03in x 2.85in x 1.60in (20.40cm x 7.24cm x 4.06cm) Weight: meter only - 7.7oz (218gm) Optional hard plastic carrying case 2-year limited warranty on manufacture's defects. Bonus warranty with on-line registration
Special Packages: The FX-20, purchased individually, includes the FX-20 meter only. Order as FX-20 The Value Package includes the FX-20 meter and 1235 10’ prod. Order as FX-20/1235, also available as Value "18" Package. Order as FX-20/1235/18 The Value 18” Package includes the FX-20 meter, and 1235/18 18” prod. Order as FX-20/1235/18

Click to enlarge!

Electrodes

	1235 Pen electrode available in 2 lengths: 1235 – 25cm (10”) 1235/18 – 45cm (18”) (Attaches directly to the connector on top of the meter) Benefits For moisture measuring in standard bales
	830-X Pen electrode available in different lengths: 830-2 – 25cm (10”) 830-3 – 45cm (18”) 830-4 – 90cm (36”) (Requires H-4 Handle) Benefits For moisture measuring in standard and high density bales
	831 Short needle electrode (Requires H-4 Handle) Benefits Multi-pin probe, for testing MC of hay in the windrow and other loose material
	H-4 Handle for electrodes 830-x, 831 and 832 Benefits Useful for large or high density bales. Two handed operation is recommended over using an electrode that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

Accessoires

MCS-5
This moisture content standard is great for verifying that your F-series moisture meter is in calibration. With two electrical resistance values (10% and 20%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy.

Downloads & Videos

Manual:
Brochure:

Information request

Top