Building materials ▼

• Restoration

• Building inspection

pinless moisture measurement - flooring

restoration moisture meter complete package

moisture inspection

Home > Building materials > Building inspection

TechCheckPlus 2-in-1 building materials moisture meter - Inspection

Moisture meter

Name: TechCheckPlus 2-in-1 building materials moisture meter - Inspection
Material: Floorings, Floors, Walls, Drywall, Ceilings, Building materials, Wood
Mc: 6-60% on wood 0.1-6% on drywall (Delmhorst Exclusive Scale) 0–300 numerical reference scale for non-wood building materials (Scan mode)
Calibrations: Wood, Drywall
Overview TechCheckPlus 2-in-1 meter is designed to scan and locate moisture levels in buildings. Given the challenging conditions of building inspection, it pays to have an easy-to-use moisture meter that you can depend on. The accurate 2-in-1 TechCheck PLUS was designed with simplicity in mind and helps to make even the most demanding job simple. The newly updated TechCheck PLUS has all the great features you've come to expect, along with some new ones.
Your Benefits: Bright, clear digital display Pin mode: • 0.1% - 6% drywall scale, Delmhorst Exclusive • 6%-60% MC wood scale • Integral Contact pins mounted on top of meter provide 8mm (5/16”) penetration • Built-in connector accepts any Delmhorst electrode Scan Mode: (0-300 numerical reference scale) Spanish language option Built-in back-light makes reading in dark places a cinch Auto-shutoff timer saves battery life Audible, adjustable alarm alerts you when your pre-selected MC has been reached Operating Temperature: from -20° to +70°C Size: 22x9x4,5cm (8½”x3⅜”x1¾”) Weight: 312gr. (11 oz.) Rugged construction ensures years of reliable use Sturdy plastic carrying case 9V battery 1-year warranty
Special Packages: TechCheck PLUS Insulation package: Includes meter, 21-E electrode, extra contact pins for the meter, and carrying case

TechCheckPlus 2-in-1 building materials moisture meter - Inspection

Electrodes

	26-ES Wood hammer Hammer electrode. The 496 contact pins that come with the 26-ES penetrate 29mm (1⅛”) and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. Also available as the 26-ED, which includes gauge to measure pin penetration depth. Benefits This hammer electrode will easily check high density hardwood that short pins are unable to penetrate. It will also easily penetrate through flooring to plywood sub-floor or concrete.
	2-E Building materials Fitted with the same 8mm (5∕16") penetration pins that are mounted on our pin type meters. Benefits Electrode great for hard to read areas. Use on wood joists and drywall.
	15-E Wood Pin type, with two rows of four pins each, maximum penetration 3mm (⅛"). Penetration can be adjusted according to stock thickness by means of gauge block Benefits Used for veneer
	22-E Pin type, comes with A-111 uninsulated contact pins for 38mm (1½") penetration. Will also accept 496, insulated pins, 29mm (1⅛”) penetration Benefits For use on plaster, masonry and wood
	21-E Long pin type. The 608 pins that come with the 21-E are insulated, except at the tips, and can reach a maximum penetration of 8.25cm (3¼"). The 21-E is also available as 21-E/001 with 15.25cm (6") penetration, or as the 21-ET with a tapped handle for hard to reach areas. Benefits For use on roofs, insulation, or EIFS
	19-E/STC Features two 13cm (5'') long blades, bent to a 35° angle, and coated in Teflon except for the tips Benefits Great for checking behind trim and baseboard molding

TechCheckPlus 2-in-1 building materials moisture meter - Inspection

Accessoires

	MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy.
	HP-1 Hole punch to make pilot holes in stucco to reduce pin damage.
	2497/A-100 Uninsulated pin and retainer with 8mm (5/16") penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 38mm (1 ½”), concrete and gypsum.
	496 496 contact pins are insulated except at the tips, and measure 5cm (2") overall with 29mm (1 1/8") penetration. Standard on the 26-ES. Used to check wood up to 13cm.
	1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 38mm (1½”) insulated pin with 13mm (1/2") penetration. The 1849 is suitable for wood up to 5cm (2") thick.
	608 The 608 insulated contact pins measure 10cm (4") overall, and penetrate 8,25cm (3 1/4"). Standard on 21-E and 18-ES electrodes. Used on roofing, insulation, timber, poles, and EIFS.
	608/001 The 608/001 insulated contact pins measure 18cm (17") overall, and penetrate 15,25cm (6"). Alternative length to be used on 21-E and 18-ES electrodes. Used on roofing, insulation, timber, poles, and EIFS.
	A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 36mm (1 7/16”) and has 1,3cm (1/2") penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 5cm (2") thick.
	632/4 Retainer used to hold contact pins in place. Used with # 496, # 1849, and # A-111 pins.
	305RET-0021/4 Retainer used to hold contact pins in place. Used with pin #608 and pin #608/001.

TechCheckPlus 2-in-1 building materials moisture meter - Inspection

Downloads & Videos

Manual:
Brochure:

TechCheckPlus 2-in-1 building materials moisture meter - Inspection

Information request

TechCheckPlus 2-in-1 building materials moisture meter - Inspection

Top

Copyright © 2024 Delmhorst Europe – All rights reserved | sitemap