Building materials ▼

• Restoration

• Building inspection

pinless moisture measurement - flooring

restoration moisture meter complete package

moisture inspection

Home > Building materials > Building inspection

BD-10 building materials moisture meter - Inspection

Moisture meter

Name: BD-10 building materials moisture meter - Inspection
Material: Floorings, Floors, Walls, Drywall, Ceilings, Building materials, Wood
Mc: 6-40% on wood 0–100 reference scale for non-wood building materials
Calibrations: Wood
Overview Easy to operate and easy to read, the BD-10 measures moisture in wood and other non-wood building materials. For those who prefer an analog display, the BD-10 is a great alternative to the digital BD-2100. The BD-10 is a great entry level meter, and is ready to go with a single button press!
Your Benefits: Easy-to-read analog display Two scales: • Wood Scale - 6% - 40% moisture range. Use for flooring and building material such as wood studs, floor joists, subfloors • Reference Scale - Reads from 0 - 100 on a relative basis. Use on non-wood materials such as concrete, plaster, and insulation Built-in calibration check Integral contact pins mounted on top of meter provide 8mm (5/16”) penetration Built-in connector accepts any Delmhorst electrode Size: 20x8x4cm (8x3x1⅝”) Weight: 284gr. (10 oz.) Rugged construction ensures years of reliable use Sturdy plastic carrying case 9V battery 1-year warranty
Special Packages: Moisture meter BD-10 Package: Includes meter, carrying case, extra contact pins for the meter, and 21-E electrode Moisture meter BD-10 Flooring Package: Includes meter, 26-ES electrode, extra contact pins for the meter, extra 496 pins for the 26-ES electrode, and carrying case Moisture meter BD-10 EIFS Package: Includes meter, carrying case, extra contact pins for the meter, 21-E electrode, (2) 608/001 contact pins, and HP-1 hole punch Moisture meter BD-10 Complete Package: Includes meter, 21-E electrode, 26-ES electrode, extra contact pins for the meter, extra 496 pins for the 26-ES electrode, and carrying case

BD-10 building materials moisture meter - Inspection

Electrodes

	26-ES Wood hammer Hammer electrode. The 496 contact pins that come with the 26-ES penetrate 29mm (1⅛”) and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. Also available as the 26-ED, which includes gauge to measure pin penetration depth. Benefits This hammer electrode will easily check high density hardwood that short pins are unable to penetrate. It will also easily penetrate through flooring to plywood sub-floor or concrete.
	2-E Building materials Fitted with the same 8mm (5∕16") penetration pins that are mounted on our pin type meters. Benefits Electrode great for hard to read areas. Use on wood joists and drywall.
	15-E Wood Pin type, with two rows of four pins each, maximum penetration 3mm (⅛"). Penetration can be adjusted according to stock thickness by means of gauge block Benefits Used for veneer
	22-E Pin type, comes with A-111 uninsulated contact pins for 38mm (1½") penetration. Will also accept 496, insulated pins, 29mm (1⅛”) penetration Benefits For use on plaster, masonry and wood
	21-E Long pin type. The 608 pins that come with the 21-E are insulated, except at the tips, and can reach a maximum penetration of 8.25cm (3¼"). The 21-E is also available as 21-E/001 with 15.25cm (6") penetration, or as the 21-ET with a tapped handle for hard to reach areas. Benefits For use on roofs, insulation, or EIFS
	19-E/STC Features two 13cm (5'') long blades, bent to a 35° angle, and coated in Teflon except for the tips Benefits Great for checking behind trim and baseboard molding

BD-10 building materials moisture meter - Inspection

Accessoires

	MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy.
	HP-1 Hole punch to make pilot holes in stucco to reduce pin damage.
	496 496 contact pins are insulated except at the tips, and measure 5cm (2") overall with 29mm (1 1/8") penetration. Standard on the 26-ES. Used to check wood up to 13cm.
	1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 38mm (1½”) insulated pin with 13mm (1/2") penetration. The 1849 is suitable for wood up to 5cm (2") thick.
	608 The 608 insulated contact pins measure 10cm (4") overall, and penetrate 8,25cm (3 1/4"). Standard on 21-E and 18-ES electrodes. Used on roofing, insulation, timber, poles, and EIFS.
	608/001 The 608/001 insulated contact pins measure 18cm (17") overall, and penetrate 15,25cm (6"). Alternative length to be used on 21-E and 18-ES electrodes. Used on roofing, insulation, timber, poles, and EIFS.
	A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 36mm (1 7/16”) and has 1,3cm (1/2") penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 5cm (2") thick.
	632/4 Retainer used to hold contact pins in place. Used with # 496, # 1849, and # A-111 pins.
	305RET-0021/4 Retainer used to hold contact pins in place. Used with pin #608 and pin #608/001.

BD-10 building materials moisture meter - Inspection

Downloads & Videos

Manual:
Brochure:

BD-10 building materials moisture meter - Inspection

Information request

BD-10 building materials moisture meter - Inspection

Top

Copyright © 2024 Delmhorst Europe – All rights reserved | sitemap