BD-2100 wood moisture meter - Flooring

Moisture meter

Name: BD-2100 wood moisture meter - Flooring
Material: Wood, Flooring, Concrete, Drywall, Plaster, EIFS, Roofing, Insulation
Mc: 6-40% on wood 0,2-50% on gypsum 0-100 on a relative basis for non-wood materials
Calibrations: Wood, Gypsum
Overview The best-selling BD-2100 is a versatile moisture tester. Besides testing the moisture content of your wooden floorings, it also can be used on gypsum, concrete, sheetrock and other building materials. The BD-2100 has a digital display, an adjustable alarm, and Delmhorst’s exclusive calibrated drywall scale as well.
Your Benefits: Bright, clear digital display Three scales: •Wood Scale - 6% - 40% moisture range. Use for flooring and building materials, such as wood studs, floor joists, subfloors •Reference Scale - reads from 0 - 100 on a relative basis. Use on non-wood materials, such as concrete, plaster, and insulation •Gypsum Scale - 0.2%-50% moisture range. Use on drywall Averages up to 100 accumulated readings Built-in calibration check Audible, adjustable alarm alerts you when your pre-selected MC has been reached Integral contact pins mounted on top of meter provide 8mm (5/16”) penetration Built-in connector accepts any Delmhorst electrode Size: 20x8x4cm (8x3x1 5/8”) Weight: 285gr. (10 oz) Rugged construction ensures years of reliable use Sturdy plastic carrying case 9V battery 1-year warranty
Special Packages: Moisture BD-2100 Flooring Package: Includes meter, 26-ES electrode, extra contact pins for the meter, extra 496 pins for the 26-ES electrode, and carrying case Moisture BD-2100 Complete Package: Includes meter, 21-E electrode, 26-ES electrode, extra contact pins for the meter, extra 496 pins for the 26-ES electrode, and carrying case

Electrodes

26-ES Wood hammer
Hammer electrode. The 496 contact pins that come with the 26-ES penetrate 29mm (1⅛”) and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration.
Also available as the 26-ED, which includes gauge to measure pin penetration depth.

Benefits
This hammer electrode will easily check high density hardwood that short pins are unable to penetrate. It will also easily penetrate through flooring to plywood sub-floor or concrete.

2-E Building materials
Fitted with the same 8mm (5∕16") penetration pins that are mounted on our pin type meters.

Benefits
Electrode great for hard to read areas.
Use on wood joists and drywall.

Accessoires

	MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy.
	2497/A-100 Uninsulated pin and retainer with 8mm (5/16") penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 38mm (1 ½”), concrete and gypsum.
	496 496 contact pins are insulated except at the tips, and measure 5cm (2") overall with 29mm (1 1/8") penetration. Standard on the 26-ES. Used to check wood up to 13cm.
	1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 38mm (1½”) insulated pin with 13mm (1/2") penetration. The 1849 is suitable for wood up to 5cm (2") thick.
	A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 36mm (1 7/16”) and has 1,3cm (1/2") penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 5cm (2") thick.
	632/4 Retainer used to hold contact pins in place. Used with # 496, # 1849, and # A-111 pins.

Downloads & Videos

Brochure:

Information request

Top