Building materials

• Woodworking

• Industrial & mill

• In-Kiln monitoring

pinless moisture measurement - flooring

restoration moisture meter complete package

moisture inspection

Home > Wood > Industrial & mill

J-2000 wood moisture meter - Industrial & Mill

Moisture meter

Name: J-2000 wood moisture meter - Industrial & Mill
Material: Wood, timber, lumber, pellets, shavings, tree bark, wooden products
Mc: 6-40% on wood 6-60% on wood
Calibrations: Wood species
Overview For many purposes, the J-2000 helps to keep up with ever-changing job conditions. With built-in wood species correction and temperature correction, along with storage and informative reading statistics the J-2000 is an extremely versatile tool at a great value.
Your Benefits: Bright, clear digital display Corrects for 48 individual wood species and temperature (°C and °F) Scandinavian version available, includes additional European wood species: Scandinavian Pine, Scandinavian Spruce and Scandinavian Birch Averages up to 100 accumulated readings Moisture Range: 6%-40% on wood, also available 6%-60% Built-in calibration check Integral contact pins mounted on top of meter provide 5/16” penetration Built-in connector accepts any Delmhorst electrode Size: 20x8x4cm (8”x3”x1 5/8”) Weight: 284gr. (10oz) Rugged construction ensures years of reliable use Sturdy plastic carrying case 9V battery 1-year warranty
Special Packages: Moisture meter package J-2000/PKG: Includes meter with MC 6%-40%, 26-ES electrode, extra contact pins for the meter, extra 496 pins for 26-ES hammer electrode Moisture meter package J-2000/6-60/PKG: Includes meter with MC 6%-60%, 26-ES electrode, extra contact pins for the meter, extra 496 pins for 26-ES hammer electrode

J-2000 wood moisture meter - Industrial & Mill

Click to enlarge!

Electrodes

	26-ES Wood hammer Hammer electrode. The 496 contact pins that come with the 26-ES penetrate 29mm (1⅛”) and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. Also available as the 26-ED, which includes gauge to measure pin penetration depth. Benefits This hammer electrode will easily check high density hardwood that short pins are unable to penetrate. It will also easily penetrate through flooring to plywood sub-floor or concrete.
	2-E Wood Fitted with the same 8mm (5/16") penetration pins that are mounted on our pin type meters Benefits Electrode great for hard to read areas, and to minimize stress placed on the meter casing Use on timber, poles and veneer
	830-X Wood Pen electrode available in different lengths: 830-2 – 25cm (10”) 830-3 – 45cm (18”) 830-4 – 90cm (36”) (Requires H-4 Handle) Benefits For moisture measuring in sawdust
	H-4 Handle for electrodes 830-x, 831 and 832 Benefits Useful for large or high density bales. Two handed operation is recommended over using an electrode that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.
	19-E Wood Blade type electrode. Available blade lengths: 125mm (5”) 300mm (12”) 450mm (18”) Benefits Electrode designed for measuring in wood pellets, shavings, tree bark, etc.
	15-E Wood Pin type, with two rows of four pins each, maximum penetration 3mm (⅛"). Penetration can be adjusted according to stock thickness by means of gauge block Benefits Used for veneer
	22-E Pin type, comes with A-111 uninsulated contact pins for 38mm (1½") penetration. Will also accept 496, insulated pins, 29mm (1⅛”) penetration Benefits For use on plaster, masonry and wood
	42-E/B T-handle electrode with 1cm (3/8") penetration. Stickers must be at least 16mm (5/8"). Also offered in and 137cm (4 1/2 ft.) length as 42E/B/4.5 Benefits To check moisture in stacks in or out of the kiln
	4-E Pin type, comes with 4 uninsulated 2497/A-100 contact pins for 8mm (5/16") penetration Benefits Use on kiln-dried boards up to 5cm (2") and on air-dried boards up to 32mm (5/4")
	18-ES hammer Similar as the 26-ES hammer but with deeper penetration option. The 608 insulated pins that come with the 18-ES penetrate 8,25cm (3 1/4”) and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. Also available as the 18-ED, which includes gauge to measure pin penetration depth. Benefits Ideal for timber, poles, and ties.

J-2000 wood moisture meter - Industrial & Mill

Accessoires

	MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy.
	496 496 contact pins are insulated except at the tips, and measure 5cm (2") overall with 29mm (1 1/8") penetration. Standard on the 26-ES. Used to check wood up to 13cm.
	1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 38mm (1½”) insulated pin with 13mm (1/2") penetration. The 1849 is suitable for wood up to 5cm (2") thick.
	A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 36mm (1 7/16”) and has 1,3cm (1/2") penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 5cm (2") thick.
	632/4 Retainer used to hold contact pins in place. Used with # 496, # 1849, and # A-111 pins.

J-2000 wood moisture meter - Industrial & Mill

Downloads & Videos

Manual:
Brochure:

J-2000 wood moisture meter - Industrial & Mill

Information request

J-2000 wood moisture meter - Industrial & Mill

Top

Copyright © 2024 Delmhorst Europe – All rights reserved | sitemap