Building materials

• Woodworking

• Industrial & mill

• In-Kiln monitoring

pinless moisture measurement - flooring

restoration moisture meter complete package

moisture inspection

Home > Wood > Woodworking

J-2000 wood moisture meter - Woodworking

Moisture meter

Name: J-2000 wood moisture meter - Woodworking
Material: Wood, timber, lumber, hardwood, softwood, floorings, veneer
Mc: 6-40% on wood 6-60% on wood
Calibrations: Wood species
Overview For many purposes, the J-2000 helps to keep up with ever-changing job conditions. With built-in wood species correction and temperature correction, along with storage and informative reading statistics the J-2000 is an extremely versatile tool at a great value. A specific designed Scandinavian model is available now for the local European market.
Your Benefits: Bright, clear digital display Corrects for 48 individual wood species and temperature (°C and °F) Scandinavian version available, includes additional European wood species: Scandinavian Pine, Scandinavian Spruce and Scandinavian Birch Averages up to 100 accumulated readings Moisture Range: 6%-40% on wood, also available 6%-60% 0.1% MC resolution Built-in calibration check Integral contact pins mounted on top of meter provide 8mm (5/16”) penetration Built-in connector accepts any Delmhorst electrode Operating Temperature: from 0° to 50°C Size: 20x8x4cm (8”x3”x1⅝”) Weight: 284gr. (10oz) Rugged construction ensures years of reliable use Sturdy plastic carrying case 9V battery 1-year warranty
Special Packages: Moisture meter package J-2000/PKG: Includes meter with MC 6%-40%, 26-ES electrode, extra contact pins for the meter, extra 496 pins for 26-ES hammer electrode. Also available as J-2000/Scandinavian/PKG. Moisture meter package J-2000/SC/PKG: Includes meter with MC 6%-40%, 26-ED electrode, extra contact pins for the meter, extra 496 pins for 26-ED hammer electrode. Moisture meter package J-2000/6-60/PKG: Includes meter with MC 6%-60%, 26-ES electrode, extra contact pins for the meter, extra 496 pins for 26-ES hammer electrode

J-2000 wood moisture meter - Woodworking

Electrodes

	26-ES Wood hammer Hammer electrode. The 496 contact pins that come with the 26-ES penetrate 29mm (1⅛”) and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. Also available as the 26-ED, which includes gauge to measure pin penetration depth. Benefits This hammer electrode will easily check high density hardwood that short pins are unable to penetrate. It will also easily penetrate through flooring to plywood sub-floor or concrete.
	2-E Wood Fitted with the same 8mm (5/16") penetration pins that are mounted on our pin type meters Benefits Electrode great for hard to read areas, and to minimize stress placed on the meter casing Use on timber, poles and veneer
	15-E Wood Pin type, with two rows of four pins each, maximum penetration 3mm (⅛"). Penetration can be adjusted according to stock thickness by means of gauge block Benefits Used for veneer
	22-E Pin type, comes with A-111 uninsulated contact pins for 38mm (1½") penetration. Will also accept 496, insulated pins, 29mm (1⅛”) penetration Benefits For use on plaster, masonry and wood
	4-E Pin type, comes with 4 uninsulated 2497/A-100 contact pins for 8mm (5/16") penetration Benefits Use on kiln-dried boards up to 5cm (2") and on air-dried boards up to 32mm (5/4")

J-2000 wood moisture meter - Woodworking

Accessoires

	MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy.
	496 496 contact pins are insulated except at the tips, and measure 5cm (2") overall with 29mm (1 1/8") penetration. Standard on the 26-ES. Used to check wood up to 13cm.
	1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 38mm (1½”) insulated pin with 13mm (1/2") penetration. The 1849 is suitable for wood up to 5cm (2") thick.
	A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 36mm (1 7/16”) and has 1,3cm (1/2") penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 5cm (2") thick.
	632/4 Retainer used to hold contact pins in place. Used with # 496, # 1849, and # A-111 pins.
	305RET-0021/4 Retainer used to hold contact pins in place. Used with pin #608 and pin #608/001.

J-2000 wood moisture meter - Woodworking

Downloads & Videos

Manual:
Brochure:

J-2000 wood moisture meter - Woodworking

Information request

J-2000 wood moisture meter - Woodworking

Top

Copyright © 2024 Delmhorst Europe – All rights reserved | sitemap